Intake Control C 60 / C 100 / C 150 - Guidelines for installation, servicing, safety and storage

C 60 / C 100 / C 150 Installation & Maintenance

Maintenance:

The ROTORCOMP intake controls are maintenance-free. Gaskets and moving parts are subject to natural wear. Functional checks in accordance with the prescribed system maintenance works are necessary.

Malfunctions:

The ROTORCOMP intake control systems are carefully tested at the factory and absolutely safe if installed according to the installation instructions. Should any malfunction occur despite this, please contact our sales engineers.

Safety instructions:

This component does not constitute a finished product in the legal sense of the term. Only after installation and in connection with other components does it form a final product - e.g. a screw compressor system. Its proper installation is thus the responsibility of the system manufacturer.
Screw compressor systems must be installed and operated in accordance with the currently valid safety and accident prevention regulations.

Storage:

There must be an adequate corrosion protection procedure carried out for storage over a lengthy period of time. All of the components must be protected against damage from jolting and impact. Any transportation damage must be reported immediately to the forwarding agent. Store in dry rooms without acid vapors, alkalis or other chemicals 1,5 m (2 yds) away from radiators and at least 0,20 m (8 in.) above storage room floor. Storage not below +20 °C and at max. 50% relative air humidity.

Technical inquiries:

The points listed above are the prerequisites for safe operation. If you have additional technical inquiries please get in touch with ROTORCOMP.

Spare parts:

The original spare parts for these ROTORCOMP components are listed in our spare parts catalogue. Please use correct spare parts order numbers.

ROTORCOMP components comply with the latest state of technology. However, in the interest of further technical development, we reserve the right to make modifications.