4 and 5-Stage Compressors

High Capacity

Pressure
5000 to 7000 psig / 345 to 483 bar

Capacity
25 to 120 scfm / 708 to 3400 l/min

Power
25 to 100 hp / 18.5 to 75 kw

The high capacity range of large volume industrial air compressors from the technology leader in high pressure features continuous-duty rated, multi-stage, air cooled, pressure lubricated compressors for the most demanding requirements.
The full-featured control system allows for unattended automatic operation. Heavy-duty frames and balanced compressor designs do not require a special foundation for installation.

1) Compressor capacity (FAD) is referenced to standard inlet conditions and 80% of the compressor's maximum working pressure. Tolerance +/- 5%.
2) 3-phase motors only, 60 Hz standard. 50 Hz available on request.
3) Maximum working pressure is 7000 psig. Information valid for 6000 psig only.
E3 = 230–460 / 3 / 60
Other voltages and frequencies available upon request.
Engine driven models available.

Standard Scope of Supply

Multi-stage, air cooled, pressure lubricated, continuous-duty rated reciprocating compressor

Electric motor (ODP) with v-belt drive, belt guard and belt tensioning device

Automatic condensate drain with condensate collector.
Collector includes switch for high condensate level.

Automatic operation with PLC controller.
Includes operator keypad and text display for operation, maintenance and troubleshooting

NEMA 4 rated electrical enclosure with UL listed control panel

Fused control voltage transformer

Hour meter and temperature switch

Pressure sensors for oil pressure and final pressure

Emergency stop push button and audible alarm

Ambient temperature range 40˚ to 113˚ F

12 month warranty

60–100 hp models

Soft starter

TEFC motor

Circuit breaker disconnect

Available Accessoiries

TEFC motor (25–40 hp)

Enclosure

BAUER air purification system with SECURUS