Setting new standards of safety for filling
Details B-SAFE 100
Filling safety made to measure
 |
1
Safety chamber
2
Safety doors
3
Filling control
4
Proportional valve
5
Filling panel
6
Hoses
7
On-off switch
8
Emergency switch |
1
SAFETY CHAMBER
Safe protection against exploding cylinders or
severed filling hose connections due to extremely
robust safety chamber made of steel.
Transportable for mobile use, even for use in
vehicles.
Controlled air release to the housing side in the
event of an exploding cylinder for the protection
of the operating personnel.
Easy loading, even in cramped confines, thanks to
transport openings for pallet trucks on all sides of the housing.
2
SAFETY DOORS
Automatic locking of the explosion-proof doors
during the filling process for preventing operating
errors.
Easy opening for rapid cylinder connection.
3
Filling Control
Easy to operate navigation and entry of all parameters
into the control menu via easy to read
touch screen.
Permanent information for the operator via the
display about all important parameters during the
entire filling process.
4
PROPORTIONAL VALVE *
Adjustable average filling rates between 20 and
50 bar/min for safe filling, in particular for
composite cylinders.
Time-consuming topping up of pressure cylinders
is made unnecessary as a result of the defined
filling process.
* Optional
5
FILlING DEVICES
Filling optionally via the integrated filling panel or
hoses.
Existing filling panels from BAUER at the operating company
can be integrated (see list of recommendations).
Filling of up to 10 pressure cylinders at the same
time is possible 1).
Filling panels are mounted at an ergonomic height.
Complete automatic pressure release follows the
completion of the filling process 2).
| Filling configuration |
Proportional
valve 5) |
Solenoid
valve |
Proportional valve 5) +
solenoid air release
valve |
Solenoid valve +
solenoid air release
valve |
Fixing for pressure
cylinder
(optional) |
| Filling panel 200 bar direct filling connections |
 |
 |
|
|
|
| Filling panel 300 bar direct filling connections |
 |
 |
|
|
|
| Filling panel 200/300 bar direct filling connections |
 |
 |
|
|
|
| |
Flexible hoses 200 bar incl. automatic
pressure release valve |
|
|
4) |
 |
 |
Flexible hoses 300 bar incl. automatic
pressure release valve |
|
|
4) |
 |
 |
Flexible hoses 200/300 bar incl. automatic
pressure release valve |
|
|
3) |
3) |
 |
1) When using hose connections (cylinders: max. width ø 18 cm / max. heigth 60 cm)
2) via hose connection
3) Only for 2 pressure ranges: 1 system pressure regulator + 1 safety valve 300bar + 1 pressure sensor + 1 pressure gauge
4) Incl. additional safety valve
5) only possible with storage bank
|