UNICUS III - The Total System - 7.5 - 30 HP • 5000 / 6000 PSIG

UNICUS III

UNIII/25H-E3 - Electric Motor Drive

Containment Fill Station Three Position Fill

Hinged Cascade Fill Control Panel Directional Fill Schematic

Air Storage Shown with Two (2) Additional (option) ASME Cylinders

UNICUS III Cylinder Recharging Station is the total system for recharging high or low pressure SCBA or SCUBA cylinders. The integrated system design combines a BAUER four or five stage high pressure compressor, BAUER breathing air purification system, air storage system, cascade fill panel and containment fill station into one user friendly workstation. Independently tested for safety, a UL listed electrical assembly and the proven reputation for superior performance makes the UNICUS III the most advanced fill station available.

Standard Features - 5000/6000 PSIG

Full Gauge Panel including a Pressure Gauge for each Stage of Compression, Oil Pressure and E-Stop Button

Audible Alarm on Safety Shutdowns

Hinged Cascade Fill Control Panel with Lexan Laminate Air Flow / Fill Schematic

PLC Controller and NEMA 4 Electrical Enclosure

Smart Pad Operator Interface Console with scrolling Four-Line Text Display

Inlet Filter Maintenance Indicator

Condensate Reservoir with Automatic “Full” Indication and Compressor Shutdown

Two (2) ASME Code Stamped Air Cylinders Installed in an Integral Rack

Sound Attenuating Enclosure with Slam-Action Latches and Lift-Off Hinges

Three Position Containment Fill Station accommodates SCBA or SCUBA Cylinders up to 31" in Overall Length

* Based on recharging an 80 cubic foot tank from 500 to 3000 PSIG.
** Compressor capacity referenced to standard inlet conditions.

+ 30 HP driven units are incorporated within the UNII frame (ask for details on scope of supply).
E1 = Single Phase Electric, 230 VAC/60 Hz
E3 = Three Phase Electric, 230/460 VAC/60 Hz.

Other voltages available on request.

Dimensions and weights are approximate and are subject to change.